Reply to thread

Message: <blockquote data-quote="rtgreen" data-source="post: 556625" data-attributes="member: 8812">BOI Headlight are hit or miss....plain and simple. Some from their batch come out good some are horrible. Good luck getting them to swap them out or get a refund. They refused when I had the same issue. So I ended up putting my stock corners back on. My issue was the rubber seal on the corner light was way off...it was not even close to matching up with the body. We bought our 96 GT with 11k miles and it has never been wrecked, so i know that it's not a body panel issue. BOI didn't even want me to send them pictures of the gap. Their customer service was horrible. Worst buying experience I've ever had. Too bad I gave them good feedback once it was shipped quickly to my door. Learned my lesson. Next set I get will be from Ford. My Local dealer still has stock replacements.EDIT: Oh and I was told by the service rep at BOI that it's impossible to have a bad batch of corner lights. They come from a mold, so there is no way the rubber could be glued on wrong. I replied that I found it very hard to beleive that a Chines made headlight could be made without ever having any bad batch runs. Rep also asked me if I had my "head in my A$$" because there could be no way that it didn't fit. I never one cussed the guy, or came off as being rude, just wanted them to take a look at the pictures to see that the rubber strip was too high on the corner light. Good luck!</blockquote>