Reply to thread

Message: <blockquote data-quote="DFG_magic" data-source="post: 1388561" data-attributes="member: 10108"><p>Well.. I couldn't stop the leak in the upper right corner and ended up pulling the intake back off yesterday and reapplied RTV and used FelPro gaskets this time. I used Victor Reinz gaskets the first time. I noticed the intake had a slight crack at the coolant block off port in the plastic. Hairline, didn't look like enough to leak but I RTV'd that spot as well. Filled her up with coolant this morning and all is well. I was leaking coolant into the rear cylinder because I buggered up the install the first time. Needless to say, I can feel a major difference now. Take your time on this job and check that intake for cracks especially if you buy used!</p></blockquote><p></p>