Reply to thread

Message: <blockquote data-quote="00kbmustang" data-source="post: 986602" data-attributes="member: 16874"><p>Hey guys, im new to this forum, and mustangs and modding in general. This is my second car and I would like to modify this one to be a fast, fun, all around street car. Something I could use for autocross, quarter mile, and as a daily driver! I would like to post my future mods and it would be great if some people could tell me if these parts would fit together, and about how much power I could make, if it would make a pretty comfortible but firm daily driver. Basically i want to know if this all would work together and what can I expect? So basically I already have a tri ax sts and borla stinger catback on my 2000 gt. Next I'm getting a magnaflow x pipe, and ford racing 3.73 gears with bama tuner. Following that I'd like a 2.6 kenne bell with 60# injectors and the cobra fuel system (please mention anything I'd need that Isn't included in the kit). I'm going to modify the stock hood to fit the kb under the hood scoop as well. Since it's a 2.6 on stock internals, I'm going to lower the boost to 8 pounds. From there I'd like to get a 5.0 block and stroke it 5.3 liters with the mmr 1000 hp internal kit and a 4 valve dohc heads. A build 6 speed transmission would be nice. I'm going to use a carbon fiber driveshaft and 31 spline differential and axles. As for the suspension H&R lowering springs, MM cc plates, Steeda aluminum control arms, subframe connectors, steeda x2 bumpsteer and x2 ball joints and tokico adjustable struts/ shocks. I'll also obviously need a new clutch, and I'm upgrading to cobra r front brake kit. I think that covers everything. I'm sorry this is such a long post, I just want to know what some good brands would be, and how stuff would work together. I'm a little worried if the 2.6 kennebell would work with the 5.3 stroker. Also how would the suspension be. Any input would be great as I'm new to the modding world! Thanks guys!</p></blockquote><p></p>