Reply to thread

Message: <blockquote data-quote="ryclef331" data-source="post: 193183" data-attributes="member: 8067">If you are hearing the pump and verifying you have pressure, you're injectors aren't firing....You can take a test light and check the flashes. The injectors SHOULD have 12volts on one wire with the key on. The other wire is just grounded to make it fire. So you can tap each wire on an injector and turn it over...if it doesn't flash but you have 12 volts on the one wire, you've got a problem somewhere. Check all your wiring....is the CCRM hooked up? Check your grounds...etc. What does your TPS read by the way?</blockquote>