Reply to thread

Message: <blockquote data-quote="LAFENATU" data-source="post: 556624" data-attributes="member: 10097">Spend the extra $1000 and get a PROVEN kit.B&G STAGE 1 1994-1995Starting at: $2,750.00!!!!!!!!!!TAX TIME SALE!!!!!!!!!!FREE SHIPPING !!!!!!!!!!!!!! MUST BE ORDERED ON LINE TO GET THESE PRICES!!!!!!!!!!!!!!!! B&G'S gen 4 kit It can not get any better!! It now comes standard with a Master power T-70Requires slight triming of the hole infront of the passside strut tower. (mostly just opening up the hole slightly) Is to be used with energey suspension mounts. Keeps all accessories (except smog) We have put great effort into making a great fitting kit that only needs to be built once, it is guarnteed to fit your mustang without you having to rebuild it just to get it to work. As long as your mustangs frame rails are where they supposed to be, I guarntee this kit to fit. No more cutting up your whole inner fenderwell just to get a ill fitting kit to work. WILL NOT WORK WITH CONVERTABLE STYLE MOUNTS!!!! If you want to run convertable style mounts you will have to cut on the car, or run spacers!!!!! Will Fit up to a t-78. 94-95 5.0 KIT Hotside Comes with: 1. Drivers side, 16 Guage mild steel header with 1/2 flanges. 38 MM wg flange installed. Machined V-band flange (not that pressed junk others offer). 2. Passengerside, 16 Guage mild steel header with 1/2 flanges. Machined V-band flange (not that pressed junk others offer). 3. 16 guage mild steel crossover, with stainless flex joint, machined vband flanges.4. 14 guage mild steel mandrel bent 3.5 downpipe. 5. Kit comes with your choice of turbo see selections below or call for pricing.6. 38 MM Silver B&G or Turbo Concepts Wastegate standard. Any bar up to 1 Bar. (higher available at higher cost.)7. 1- Turbo outlet stainless v-band clampCold side comes with:1. VS Racing INTERCOOLER, 600,750, 825 Precision units available upon request. 2. 2.5" turbo to I/C cold side pipe, with BOV flange installed. 3. 3" Intercooler to throttle body cold side pipe.4. 50MM B&G/TC B.O.VCOLD SIDE SILICONE KIT INCLUDES:1. 2- 3" hts couplers 2. 2- 2.5 to 2.5 coupler3. 4- 3" stainless band clamps4. 4- 2.5" stainless band clamps5.2- 2.5" stainless v-band clampsOIL LINE KIT INCLUDESFull oil line kit, all -an fittings Braided lines. Comes with:1. Turbo drain flange2. Oil Pan Bung3. -10 Oil drain line (Braided stainless steel with -an fittings on both ends.)4. -4 Oil pressure line (Braided stainless steel with -an fittings on both ends.)5. Turbo oil pressure inlet fitting.6. Block fitting.</blockquote>