Caboose302
Well-Known Member
Just ran a baseline. Not looking good..
249.66/282.41
Hopefully the tune will help a little.
249.66/282.41
Hopefully the tune will help a little.
Dyno time!
- Thread starter Caboose302
- Start date
Musturd
Post Whore
- Joined
- Feb 12, 2011
- Messages
- 11,225
- Reaction score
- 3,676
Something must be up even baseline with ur combo those numbers are low
OP
OP
Caboose302
Well-Known Member
The 80mm MAF was messing with the air fuel giving it too much spark and leaning it out. Couple more baselines and the tuning will start
OP
OP
Caboose302
Well-Known Member
255/290
Well after looking more into it was running way lean most of the time and switched to way rich under full throttle. Basically its been ran hard all its life and hasn't ran well so it's worn out. Last time it put down 300 was in 2004 so it's understandable. Going with a Teksid block, all forged internals, my Fox Lake PI heads, Trick Flow intake, and some custom grind blower bullet cams. Starting that this winter when I put her up for the season.
Well after looking more into it was running way lean most of the time and switched to way rich under full throttle. Basically its been ran hard all its life and hasn't ran well so it's worn out. Last time it put down 300 was in 2004 so it's understandable. Going with a Teksid block, all forged internals, my Fox Lake PI heads, Trick Flow intake, and some custom grind blower bullet cams. Starting that this winter when I put her up for the season.
MustangChris
Mythic Level
ooo. new build thread? yes please!
OP
OP
Caboose302
Well-Known Member
Since modular are a new thing for me, I'm going to take a high performance engine class and build one. It will be a nice refresher. But yes there will be plenty of pictures and updates. Building for the D1SC she'll be getting in the future.
