Reply to thread

Message: <blockquote data-quote="ttocs" data-source="post: 982577" data-attributes="member: 11896"><p>all you need to do is disconnect the power or ground from the alarm and its done.  See if you can see a yellow wire with a fuse and pull the fuse if you can.  Alot of the wiring for the alarm is in the drivers kick panel and it is common to hide it down there and just run the few ignition wires needed up to the colum.  Pull out the kick and more then likely it will be back there.  Pull the fuse, disconnect the gound or the hrns's and as long as its not a normally open starter kill thre should be no problems with it.  If you pull it out and the car will not crank let me know and we will need to find the starter kill relay and change that.</p></blockquote><p></p>