Reply to thread

Message: <blockquote data-quote="95boss351" data-source="post: 764858" data-attributes="member: 11964">Wats happening fellas. I need some advice on my current build. Before i go into what i have done, let me tell you what im looking for. Im looking for close to 400 hp and tq to the wheels. Ok right now im working with a 351w bored .030 over. forged aluminum flat top pistons with valve relief. I have trickflow twisted wedge heads but were milled down .025 (oops!) So my compression is 10.9:1. I have a stage 2 trickflow cam. Custom length hardened pushrods because of the milled heads. 1.6 trickflow aluminum rocker arms. Professional Product Typhoon efi upper and lower intake manifolds, 75mm throttle body, 76mm maf. 1 3/4 longtube headers to 2.5 collectors o/r h-pipe, original 40 series flowmasters and aluminum underdrive pulleys. plus a customed tuned chip (havent had a dyno tune yet). i dont think im at the numbers i want but i was told to get the trickflow stage 3 cam and get another intake. I was thinking the victor efi. any suggestionsThanks</blockquote>