Reply to thread

Message: <blockquote data-quote="94califiveoh" data-source="post: 881971" data-attributes="member: 12601"><p>I'd figure I'd write my success story on how I fixed my stalling problem. I posted on several forums and did tons of research did tons of work and was about to sell my baby because I could not find the stalling problem. Well, call me stupid (seriously) but the bleed screw on the throttle body fixed my problem. I had it partially closed and figured I would start out by having it as open as possible and work from there. Sure enough, the motor loves when the bleed screw is wide open. OMG Im so pumped today.</p></blockquote><p></p>