Reply to thread

Message: <blockquote data-quote="Snorky" data-source="post: 1497918" data-attributes="member: 29157">Well i put in some more work this morning.   Sandblasted the tensioner arm, throttle bracket and oil dipstick tube.  Then i cleaned everything up with xylene, and taped everything off including the harmonic balancer and water pump.  Primed everything with etching primer. 2 coats 10 min. Apart.  [ATTACH=full]15597[/ATTACH][ATTACH=full]15598[/ATTACH]Then mixed up that eastwood high temp ceramic engine paint 4:1 paint to accelerator.  A little splash of reducer, and put it into my new harbor freight paint gun.  Went with the high end central pneumatic one.  It worked really well! I am pretty impressed with it.  Laid down two medium coats of the ceramic black 20 min apart.   Then cleaned the gun with acetone.  Now its hanging up to dry.  [ATTACH=full]15601[/ATTACH]Then i went to work making a shipping crate for the crank shaft,  you can see the finished product.  I will double bag the crank, foam the crate and apply the hold down blocks and lid on monday.[ATTACH=full]15602[/ATTACH]</blockquote>