Reply to thread

Message: <blockquote data-quote="Snorky" data-source="post: 1515392" data-attributes="member: 29157">Last night I did the last segment of the FIT system then started working on the window project.  To start it off. A nice beer[ATTACH=full]23404[/ATTACH][ATTACH=full]23403[/ATTACH]A little spritz of paint will fix the etching primer spots... next time.So I drilled the rivets out on the passenger window and pulled the window out.  Fitted up some 1/8"X1/2" bar to reinforce the window. This this bracket will also help me reglue the drivers window bracket back on.  Drilled the glue slugs out of the holes. Held it up/marked it and drilled it with a #29 drill and tapped it 8-32.... used the passenger side as a template for the driver side.[ATTACH=full]23406[/ATTACH][ATTACH=full]23405[/ATTACH]As you can see the glueless bracket.  N ow I need to either A see if a friend has glass primer or suck the $60 glass primer D for a one time use..  half reinstalled the passenger window back into the door. Riveted the rear,but my rivet gun cannot reach the front rivet.  Should I cut a slot for the rivet gun? Or just use a 1/4-20 nut/bolt/lock washer? transferred the the car from blocks to jack stands. Next up I will drop the axle and start the next project.</blockquote>