Reply to thread

Message: <blockquote data-quote="Snorky" data-source="post: 1560940" data-attributes="member: 29157">Here are a few pictures of the patchy chrome shroud [ATTACH=full]40058[/ATTACH][ATTACH=full]40059[/ATTACH][ATTACH=full]40060[/ATTACH][ATTACH=full]40061[/ATTACH]I honestly dont think many people will even notice it.  So I will just run it since I feel like black shrouds will look too anemic.  I'll give it a go and .are another set later if it bugs me that badly.  Performed a smoke test looking for vacuum leaks and tapped the iac with a small hammer incase it is seized up.  When I come rolling up to a stop and press in the clutch it wants to die at times. 50/50 shot really. But if I blip the throttle(even ever so lightly) it wont die.  Hmmm... any thoughts? Anyway. Pulled the battery and drivers headlight plug. Which is missing half its retaining tab. Hooked up the hid ballasts and relay Harness/grounded it to the chassis.  Tossed the battery back in and set the lights on blocks to test out the beam pattern and to see if the bi-xenon solenoid works.[ATTACH=full]40062[/ATTACH]And wouldn't you know it.. they are clocked decently well too! <img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite1" alt=":)" title="Smile    :)" loading="lazy" data-shortname=":)" />[ATTACH=full]40063[/ATTACH]Had to test it against a giant piece of cardboard support by pump Jack's instead of that perfect fence in the background due to this gorgeous lawn ornament..[ATTACH=full]40065[/ATTACH]Then removed the Harness and cha get it back.. while I was at it I tossed in auxito led corner lights as well.  Ridiculously bright like thr tail lights. When I plugged the headlight back in the other half of the retaining tab snapped off... ugh.. and a piece of the header panel came off too when I pulled the corner light to swap the bulb.  I am pretty sure the previous owner and 30 year old plastic was the reason this car has next to no retainer clips on any of the electrical fasteners.[ATTACH=full]40064[/ATTACH]Anyway.. picked up some rubber clamps at harbor frieght and when I get another day t9 tinker I will seal up the lights and install them. Until then I need to find  ew headlight adjusters.. the star pieces are snapped off of both the set I am modifying g as well as the set on the car.  Do they come on new headlights? Last time I looked for those little adjusters I am pretty sure they wanted like $14 each. Which is mad, mad like a dog. Any suggestions would be appreciated</blockquote>