Reply to thread

Message: <blockquote data-quote="white95" data-source="post: 1466220" data-attributes="member: 10188">The stock gauges work off of the factory harness and sensors. The Holley works off of the same sensors but with it’s own harness. You’d have to run TWO sensors per function to satisfy the Holley and the stock gauges, which aren’t known to be very accurate. There are a few expensive options. The Holley is CAN (controller area network) enabled meaning you can run any gauges and/or dashes that support CAN.. Racepak, AiM, or the Holley digital dashes. If you’re set of analog style gauges, Holley (and others) offer traditional styles gauges that would look great in Florida 5.0’s gauge clusters. [ATTACH=full]5179[/ATTACH] I have the 7” Holley dash and a Steinmann cluster in mine. I took the car apart, again, so I can’t give you any ideas on glare but [USER=11896]@ttocs[/USER] may have some input.[ATTACH=full]5180[/ATTACH] So, I wired my fan to a C6 Fan controller which ramps the fan speed up and down instead of kicking high to low and lessens the sudden amp draw. All programmed into the Holley.[ATTACH=full]5178[/ATTACH]</blockquote>