Reply to thread

Message: <blockquote data-quote="ProjectMongoose" data-source="post: 806112" data-attributes="member: 13763"><p>the guy i bought it from claims that the guy he bought it from said that he bored the motor 30 over (306) put forged rotating assembly put a f303 cam in. now i check and the motor does have stock e7 heads and wanted to make sure cause it had 764 autolite plugs and i replaced them with 25 autolites. the timing was at like 25 advance so i droped it down to 10 on the dot. it does have bbk shorties o/r xpipe and dumps. also has 3.55 gears and the transmission feels brand new i havnt had not one single problem shifting. i even have the fpr set at 40psi. but when im driving part throttle is fine and ill get a little surge every now and then. but if i punch it to the floor threw out the entire rpm range you here it studdering and even more so when it hits the 4k to 6k rpms</p></blockquote><p></p>