got 3 inch tips? get in here

[r_suh]

i want some 3 inch tips but don't want the ones that just bolt on just behind the rear wheels. any way to get 3" tips that bolts right up to mufflers? or would i have to get new ones?

 

[OnyxCobra]

Bassani, I think they only make these tips for the 94/95 catbacks. I forget how long they are but I believe they're over 2 feet.

 

[eliyarbrough]

Here is when I had 3 1/2's. I loved the look of it. That was right off the bat though. I think about 4-5 set-ups ago.

They weren't any special brand, just what my exhaust guy uses. Maybe 18" long?

 

[r_suh]

thanks for the pics guys. but do the tips just bolt up just behind the tires? do they just cut the originals and just bolt up tips? or are there tips that start 3" from the catback?

 

[realitygt]

thanks for the pics guys. but do the tips just bolt up just behind the tires? do they just cut the originals and just bolt up tips? or are there tips that start 3" from the catback?

they bolt on to the flow tubes that go over the axle, then bolt to mufflers then bolt to another tube that goes to the midpipe.

and the bassani 3" tips won't bolt to the stock tubes that go over the axle because 94-97 had 2 1/4 inch piping and the tips bolt on to 2 1/2 inch piping. 98 has 2 1/2 inch piping , but still i don't know if the angle would be right for them to even bolt up straight :dunno: be better off just buying the catback

 

[OnyxCobra]

yeah from where my muffler exits to the end of the tailpipe it's all 1 piece. Bassani fitment is weird, and by weird i mean shitty, so it might not work well with a different catback.

 

[2slo95fiveoh]

i have heard from a couple people that the factory 96-98 cobra tailpipes were almost 3" diameter?

 

[OnyxCobra]

i have heard from a couple people that the factory 96-98 cobra tailpipes were almost 3" diameter?

2.75" tailpipes.