Reply to thread

Message: <blockquote data-quote="sn95gtvert" data-source="post: 669046" data-attributes="member: 11975">money and time are the two main factors... i spent $1100 total on parts. the heads had new valves 3 angle vavle job fully cleaned and shaved .010, clean 95 gt40 intake upper and lower, 24# injectors, a 95 cobra cam, 70mm throttle body, 1.7 crane roller rockers and a chip for the computer.i sold the heads for $400 when money was tight, my stupid dog got ahold of the chip for the computer and chewed it to shreds. add $30 for intake bolts and $140 for a gasket set. and about 6 hours install time after almost a year of sitting on these parts. from what i have read the stock injectors will handle upto about 300 hp. i know im not close to that right now so im keeping them for down the road. just remember to change your maf if you change your injectors.if i had to make a guess i would say my car is at about 200 wheel hp give or take 10hp</blockquote>