Reply to thread

Message: <blockquote data-quote="justinschmidt1" data-source="post: 504306" data-attributes="member: 8889">This feels like deja vu.....Seriously, go for it...but your car is a stock NPI mustang with an o/r x pipe....4.30 gears are kinda overkill on a npi anyway...I seriously doubt you will see 13.9 but good luck.Im not pulling shit out of my ass.....its all from my experiance with my car.I have a 96 GT auto and went through it all with bolt ons.The stock stall is not high enough to get that car moving out of the hole worth a shit.My car ran about what yours did...I had exhaust and 3.73s when I ran like 14.5-14.6 at 96 I believeIt took me a lot of bolt ons, tune, 3.73s, long tubes, o/r h pipe, and a pi intake to get my car to 14.0.My 60 foots were crap, like 2.1sThe biggest problem was the 60 foot so maybe with the 4.30s you will be able to get out of the hole like the car should so I would think with traction you could definately pull low 14s....but anything better than low 14s seems optimistic.</blockquote>