Reply to thread

Message: <blockquote data-quote="Burninrock24" data-source="post: 1150079" data-attributes="member: 18179">Yep I agree 100% and thats what I planned to do as well. I talked it through with another member on my old forums account. <a href="http://www.allfordmustangs.com/forums/4-6l-talk/412489-buying-just-tail-light-lenses.html" target="_blank">http://www.allfordmustangs.com/forums/4-6l-talk/412489-buying-just-tail-light-lenses.html</a> (ignore the wiring part, I found a better solution) I'm going to extend the divider between the tails and the turn signal as far as possible. They don't bleed too much as it is now, and removing the bottom reflectors will really help to eliminate the bleeding light. Like you said, I'll most likely just JB weld sort of concoction made from ABS onto the existing divider in the stock housing to divide it as much as I can. Maybe a small foam seal on the end. Something to form to the lens, but leave a nice line where as an adhesive on the lens would look bad. And concerning the lens paint. I'm capable with a paint gun. And if I'm not, my dad can do it since worked as an auto paint detailer in the 90s, or my uncle and aunt own a auto body repair shop that they can paint it at. And if all else fails, I can go to a film.</blockquote>