Reply to thread

Message: <blockquote data-quote="Venom351R" data-source="post: 895144" data-attributes="member: 10407">Finished the heads. Was going to put the lower intake on but 2 of the intake bolt holes needed to be re tapped. The bolts would not go in, I think it was casting flash from the machining process. I decided to get the correct intake gaskets in the meantime that will fit the hoged out intake ports ( fel-pro 1262R). Also am considering installing intake studs to eliminate the issue of stripped intake bolts,<img src="http://i29.photobucket.com/albums/c273/TravisMcEwen05/Mustang%20Pics/005-42.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />Also did a quick mock up nothing was bolted on. That is condensation on the upper not dust. Was down in the nice cool basement then taken into the outside heat<img src="http://i29.photobucket.com/albums/c273/TravisMcEwen05/Mustang%20Pics/006-28.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /><img src="http://i29.photobucket.com/albums/c273/TravisMcEwen05/Mustang%20Pics/007-23.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /><img src="http://i29.photobucket.com/albums/c273/TravisMcEwen05/Mustang%20Pics/008-19.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /></blockquote>