Heater core hoses from intake to heater core.

[J_lope82]

96 gt with PI top end and non pi bottom end. The car came without the heater core hoses. I want to install the hoses. Do I need to get hoses for a PI motor or a non PI motor? Thanks in advance.

 

[07GtS197]

As far as I know they’re the same.

 

[Notthenow]

The location for pi and npi is different so neither hose bended correctly for me. I used a 95 hose. The shape was decent, but the ID is wrong (sae vs. metric?) and it tended to seep. Still looking for a better option.

 

[J_lope82]

I know now why it came without the hoses.

 

[J_lope82]

The location for pi and npi is different so neither hose bended correctly for me. I used a 95 hose. The shape was decent, but the ID is wrong (sae vs. metric?) and it tended to seep. Still looking for a better option.

Where does it seep on the manifold or the core?

 

[Notthenow]

At the back of the motor where the rubber hose goes from the tube to the heater core. Also, last time assembled I had to use rtv with the o rings at the nipple from the water pump.

 

[96blak54]

Run to the parts store and look at their selection of hoses. Youll get something pieced together

 

[Notthenow]

Blak have had trouble with the two "o" rings sealing at the nipple at the water pump?

 

[Notthenow]

Have you had trouble...