Reply to thread

Message: <blockquote data-quote="SonicStang" data-source="post: 165347" data-attributes="member: 8379">Well most of you know I own that 1996 GT with a 2002 GT PI engine and I had a Vortech installed for a couple miles, which I yanked out yesterday (had to - but that is a different story). I put everything back to stock, but the car won't fire up. It throws the Code P1000.What I exactly did:- removed the S/C- put 19lb injectors back in (they are off of a 2002 GT if that matters)- put on the stock air inlet piping, filter and maf- put on the stock driving belt- put the tune back to stock with an Xcal2What can I do? I cranked it for about 10 minutes, now the battery is almost empty. It turned but did not fire up. Well it fired up for 3 seconds when I first fired it up but after that nothing...I checked all electrical connections, everything is hooked up. I took out one spark plug (NGK BR7EF) to see if its wet but it is dry.The fuel pressure is fine. I still have the walbro 255lb/hr pump in the tank. Any input highly appreciated!!!! :-\</blockquote>