Reply to thread

Message: <blockquote data-quote="zincmock03" data-source="post: 567937" data-attributes="member: 11348"><p>Hey guys..I just rebuilt my 97 gt 5spd. I put in comp cams 262 the stage 1's. Also did full exhaust while i was at it. other than that it has no mods. Before the rebuild the car at idle would be jumpy and seem like it wanted to stall but never did. Now after the rebuild i am getting the same jumpy idle once in a while and while sitting at a red light will stall on occasion. It through the code p1443. I did some research and found out that it could either be the evap purge valve or IAC valve. Beings i had a jumpy idle and stalling issues i replaced the IAC but that did not seem to help. I only seem to have this problem when the car has been running for 10 minutes or so. Also when i go to take off when i first start the car it wants to fall flat on it's face and boggs, but again, not all the time. Would the evap purge valve cause the issues i am having or am i facing some other issue? Again, i am not having this issue all the time. THe car will start up 80% of the time and run perfectly but after a while of driving and coming to a stop, the idle goes crazy and stalls out. thanks in advance and sorry for the story book lol.</p></blockquote><p></p>