How To: 3rd brake light mod 96 to 04

97_281gt

Active Member
Joined
Mar 6, 2011
Messages
808
Reaction score
0
Or so ive been having a few people ask me how to do this I figured was a pretty known thing I guess not. but basically what this is is to get you right inner light to light up with your brake lights. It doesn't cost anything and it's very easy. Not much gain to it besides you brake lights are brighter I guess

Going from this with brakes on

a223eb1abc12c0c759e737560bf5e87e.jpg


To this

f0abb99608ddda8634a83f670b2452ea.jpg


OK so first thing your gonna do it go to the bone yard and cut you off one of these (you don't need the socket or the bulb or any thing

e1bd2b969db4c4a30c7b7caa78bd53af.jpg


Then what your gonna do is take that rubber thing and and with a pair of needle nose grab down at the bottom of the plug and pull the wire and terminal out so you will have this

f443277ba16c018fcb6b437317087986.jpg


After that take you light out and go to the right most inner light and pull the rubber thing out and there will be a open slot in there

dbdc6b3ce4ea5e0ff8a5190481aab23c.jpg


Plug your wire in there with some needle nose and put the rubber thing back on then basically gonna just tap into the colorful wire in the other plug next to it

0500afc809c6a7321d1a4773812a5f07.jpg


So the one all the way to the left that says major just tap into the light next to it and you will have this

13a9f59b1daf565b284b15af1dc4d0d0.jpg


Put it all together and repeat for the other side and now all three it your lights will light up with the brakes and blinkers

Sent From Your Moms Phone
 

Royal96

Active Member
Joined
May 30, 2015
Messages
316
Reaction score
0
Location
Cincinnati, OH
I never understood why Ford didn't do this by design. Sequential harnesses also fix the problem, but this is much cheaper. If I didn't have the sequentials I'd be doing this today. Good write up.
 
OP
OP
97_281gt

97_281gt

Active Member
Joined
Mar 6, 2011
Messages
808
Reaction score
0
I never understood why Ford didn't do this by design. Sequential harnesses also fix the problem, but this is much cheaper. If I didn't have the sequentials I'd be doing this today. Good write up.
Yea I knew the sequential also fixed it I'll probably get those again one day just don't wanna drop the 50 bucks on them quite yet

Sent From Your Moms Phone
 

lwarrior1016

Mr. Secondary Timing Chain
Staff
Joined
Sep 22, 2014
Messages
8,554
Reaction score
4,384
Location
South Mississippi
Its a Road king it's my pops bike hes about to trade it in for a street glide

Sent From Your Moms Phone

Ah, that was my next guess. I thought those were road king wheels. He is making a good choice on that street glide too. I went and test rode an 08 not too long ago and it really was a thing of beauty.

Sorry for the thread jack, I get a little excited about bikes lol.
 

Ineedav8

Active Member
Joined
Mar 1, 2013
Messages
647
Reaction score
1
Location
South Florida
Really old and kind of useless but ive noticed the same thing on the s197's it always bothers me like a bulb looks out
 

DeepList

Administrator
Admin
SN95 Supporter
Joined
Jan 2, 2013
Messages
9,695
Reaction score
348
Location
Auburn, IN
I had sequentials on my V6 because this drove me nuts. I haven't done anything with the cobra because of the ambers, and I just don't feel like messing with the harnesses.

I never understood the point of not having the interior bulbs do anything besides parking lights. It always seemed kinda dumb.

Good write up. :thumbsup:
 

Forum statistics

Threads
77,520
Messages
1,504,184
Members
14,985
Latest member
Suprasuavy

Members online

Top