Reply to thread

Message: <blockquote data-quote="Lanter" data-source="post: 1358569" data-attributes="member: 20552">Inching closer to first start up!  Spend way to long last night wiring up my MAF, would have been done in like 10 minutes if I would have just used slip loom instead of the techflex.  The stuff I has was to small to fit around the plug so I had to put in on the wiring before I soldered it and then pull it up and heat shrink it in place... what a pain.  <img src="http://s26.postimg.org/7d7jo5sll/IMG_2837.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /><img src="http://s26.postimg.org/eugr3di4p/IMG_2838.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />Also finished up mounting my oil relocation filter housing.  Still may need to trim the housing a bit to get the filter to swing up and sit closer to the car.  But for now it sits ok and looks to have enough ground clearance.  The roads I drive on are way to rough to slam the car to much so I should be able to leave it how it is.<img src="http://s26.postimg.org/p5t3w19u1/IMG_2836.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />Last bit of progress was getting the MAF flange welded on so it's ready to be re-installed for what is hopefully the last time.</blockquote>