Reply to thread

Message: <blockquote data-quote="ttocs" data-source="post: 972292" data-attributes="member: 11896">one more time - disconnect the wire that is going to the amps terminal labeled remote turn on. Now turn the radio on, and take a loop or small piece of wire and connect from the +12v constant to the remote wire terminal on the amp and the amp should turn on and play normally.If that does fix the problem then you will again need to find the factory wire that you connected your remote turn on too, or run another wire right next to the rca's. I have to say its getting a little old repeating myself on this as its not the first time... If you had just paid the $3 for the wire and ran it at the same time as suggested then this would have all been finished by now so to have to keep going over it to correct what could have been fixed.</blockquote>