king cobra question

[voidfinger]

Well you have to to get going, but you don't need to do it halfway up the block do you?

O no i don't ride the clutch or nothing.

 

[Jrgunn5150]

THats what i'm refering to, that's the big killer.

 

[ripper]

Spec 2+ FTW

 

[reivaxtorres]

hahahahaha, the first time i did a burn out in my car (which was the first one ive ever done), i revved the car up to about 5k, dropped the clutch (aka = release it as fast as you can) and then slammed on the brakes so i could get a nice burnout going. stupid me didnt realize the corner of my shoe caught the clutch pedal and dragged it down with the brake, so i was sitting there doing a burnout for about 30-60 seconds with the clutch halfway in. needless to say, the clutch was replaced about a week later. lol :hammer:

 

[MustangMatt96GT]

here is my video of my first burnout!

 

[reivaxtorres]

here is my video of my first burnout!

http://youtube.com/watch?v=h1z_RUIGz3k


this works better :hammer:

and HAHAHAHAHAHAHAHAHAHAHA, thats funny!!!! thats pretty much what happened to me, except that i actually got the tires to spin a little and throw up some smoke.

 

[MustangMatt96GT]

Wats wrong with my link?

 

[BLCKSTNG96]

just my opinion but i think king cobras are junk,they are made by valeo also just for the record.mine blew apart on for no good reason on day,clutch disc melted to the pressure plate.got a spec stage 2 after that and after that another one,im pretty happy with spec stage 2,id suggest it to anyone.

 

[reivaxtorres]

Wats wrong with my link?

it doesnt show up. i was going to quote you and say that you forgot to post the link, but then i noticed that if you quote it, its there, but its not there on the thread. i think its because you have it between the "[URL =]" things

see what i mean? im posting screen shots

[attachment deleted by admin]

 

[96gt226410]

My King Cobra is fine. The pedel effort is less than stock. I replaced my throw out bearing about a year after clutch install.

 

[MustangMatt96GT]

Wats wrong with my link?

it doesnt show up. i was going to quote you and say that you forgot to post the link, but then i noticed that if you quote it, its there, but its not there on the thread. i think its because you have it between the "[URL =]" things

see what i mean? im posting screen shots

Actually if you clicked on the little emotioncon it opened up my link! I will never put a King Cobra in ever again!

 

[reivaxtorres]

Wats wrong with my link?

it doesnt show up. i was going to quote you and say that you forgot to post the link, but then i noticed that if you quote it, its there, but its not there on the thread. i think its because you have it between the "[URL =]" things

see what i mean? im posting screen shots

Actually if you clicked on the little emotioncon it opened up my link! I will never put a King Cobra in ever again!

eh, thats too complicated for me, lol

 

[Purple97GT]

My Valeo/King Cobra clutch has been in my GT for over a year and 8,000+ miles with no problems. I can't tell you how many 1/8 and 1/4 mile passes I have on it, but its a lot!

 

[97gtconv.]

I"ve driven my buddies 98 cobra with his King Cobra and Spec 1, both had about the same pressure feel and both held mostly the same. The only difference I felt was when the Spec grabbed alittle more harder.

 

[lizzyfan]

the king cobra clutch is known to go both ways, its either going to be super stiff or super soft. what controls this? only

Viagra :rollinglaugh:
I actually had a KC before I swapped trannys and liked it, granted it's not for big power!