Reply to thread

Message: <blockquote data-quote="ttocs" data-source="post: 1530600" data-attributes="member: 11896">I thought exactly the same thing and it could just be some movie magic but with they often show on the vids that they hit it with a hammer or smack it and I am surprised it does not break.  I can kind of understand that with the fiberglass but the powder/ash I would have thought would make for a brittle end as well.Another warning about CA is it comes in different thicknesses, but they are all VERY good at glueing you to damn near anything.  I normally use the medium(back when I flew RC airplanes CA was a go-to for repairs) but once on accident I got the thin.  I went to put a dab on the wing to repair it and instead of a small drop a fair amount of liquid sprayed out, ran down the wing and then onto the bluejeans on my leg.  I had to throw the airplane down and almost literally peel those jeans off before it all cured and glued them to me.  There was a couple of times that I was holding two parts together for the 2mins it takes to cure only to discover one finger was now glued to the parts.</blockquote>