Reply to thread

Message: <blockquote data-quote="Lebedin8654" data-source="post: 490042" data-attributes="member: 10028">I am rebuilding my 5.0! Its gonna be used on a boost setup. This is what i have put together so far, i havent done anything yet i want to get a few other ideas before i act on any thing so let me know what yall think... thanksI have a Friend selling me his rotating assembly it has 40 over dish pistons, rods and crank... $150Than to get my block bored, cleaned, and the rotating assembly balanced its..................... $500Than good rings for boost about................................................................................. $200And bearings about.................................................................................. rod bearing $ 50                                                     Main bearings $ 70                                                               ------                                                               $970 bucksI feel like at is alot to be tying up! Or does it sound right?Or should i find a Rotating assembly that uses the Stock bore and eliminate the machine shop cost? Any links or ideas would be great thanks!I could always rebuild mine with rings and let it ride!</blockquote>