Reply to thread

Message: <blockquote data-quote="mikey94gt" data-source="post: 960089" data-attributes="member: 11136">??? So what intercooler kit did you buy and do you have to have a bigger then stock hood? I bought a universal CXracing intercooler kit. seems to work pretty well, its about 20* over ambient at sustained WOT. it could fit under a stock hood if the piping was final fitted and messed with more. How bad were you getting heat soak without the intercooler ?um, it wouldnt heat soak so much as put out 200* discharge temps from the blowerWill the intercooler piping fit under stock hood?Not really, lol, it was meant as a temporary setup, so it needs final fitting and setupWhy are you running a Foxbody computer and not a sn95 if you are using a moates chip and burner ?cuz i was tired of messing with the SN95 computer that seemed to fight me at every step. it was really holding back the car. it will eventually have a BigStuff3. So when you put a foxbody throttle body set up on did you just delete EGR? Wll your car pass smog? haha, smog, wassat? it has the Fox style 80mm Accufab on it, and a plate that is custom made to mount the throttle cable. It does not have an EGR spacer, makes valve cover clearance much easier. I was also looking at intercooler kit for my car but was thinking of meth instead .Hm..... Idk about meth, of course, I like to have the least amount of moving parts possible. ThanksAlso are you looking to sell some of your parts? depends on what you are looking for. the T/B and custom parts there is not gonna go anywhere anytime soon.What exactly do I need for a Foxbody Tbody >? Cable,Tbody,EGR spacer,?exactly, all those parts. T/b, EGR spacer, a non SN95 specific manifold,a throttle cable and mount bracket, and a little patienceI was thinking of doing that because the discharge pipe on the sn95 vortech kit is a joke and really restrictive ya, it is... and the fox setup is much better. I had a fox style elbow on there for a while, and it ran great with it. never messed with the SN95 setup really.</blockquote>