Reply to thread

Message: <blockquote data-quote="gnx547" data-source="post: 807050" data-attributes="member: 12380">I'm installing the rear lower control arms on my 94 GT, and I'm having a hard time getting the control arm bolt hole to line up with the axle hole. I have the rear shock and the axle dampener unbolted and disconnected. I have one bolt holding the front control arm, but it is not tightened. As you can see in the pics the control arm bushing is almost in, I can't get it in any further for the holes to line up. I jack up the control arm and still can't get the arm bolt holes to line up. If I jack up the axle the control arm moves further away from the bolt hole. Seems like the axle needs to be pushed in a little so the holes will line up, but I tried a little push and kicking, it didn't do nothing. I used my soft hammer trying to tap it in, and it didn't work. I'm stuck, How do I get these control arms in? Do I have to remove the upper control arms to get the lowers in? Any tips or suggestions?<img src="http://i52.tinypic.com/2r3ig55.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />The hole is almost lined up, I can't get it in any further<img src="http://i51.tinypic.com/30j5nd2.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /><img src="http://i56.tinypic.com/2ykb9r8.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /><img src="http://i56.tinypic.com/33fbb48.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /></blockquote>