Reply to thread

Message: <blockquote data-quote="blown98gt" data-source="post: 650277" data-attributes="member: 11284">here is my fuel setup..I got a really good deal on the Aeromotive Stealth Elim sump kit and had it welded on and used ss lines back up to my rails along with 60# injectors but what i'd recommend for a budget it this...1. 60# injectors2. Fuel rails if you don't have already..3. if you can go Dual 255lph get them BUT you can hit 600 on the following below1 255lph pump, the AFM Inline pump kit, 60# inj, and a KB 40amp BAP. I'd recommend upgrading your lines going to your rails and if you haven't already upgrade your rails obviously you'll get more outta the deal(AFM Inline Pump Kit - For stock fuel lines. This pump kit with a 255 lph in tank pump has been tested to 62 gallons per hour at 60 psi with stock fuel lines. 62 gallons per hour will handle up to 50lb injectors. This is the best we have tested with stock fuel lines. p/n PKAF-6294 )The pump held up well to my SS lines, bap and 60# at upper 600 range then i wanted more and got the sump</blockquote>