Reply to thread

Message: <blockquote data-quote="Reaperman8772" data-source="post: 1461066" data-attributes="member: 24539">wiring was correct.  though apparently there's a difference with OSS transmission versus VSS expected input.  something about 32000 pulses per mile versus 8000 expected.Started with a factor of 4 to the switches, then took her for a run.  IIRC, system was at 2k rpm at 55 in 4th.  I thought 70 at 2k in fifth(by run, 80, not 70).  first run had me at 55 by speedo but only 1300ish RPM.  mathed to do new callout....  a couple more times...  finally got it about right.  FYI Dip switches are match numbers 4, 2, 1,1/2,1/4,1/8,1/16,1/32,1/64,1/128Final setting that seems to have speedo match the rpms at least was 0110110001will check versus real world next weekend.</blockquote>