Reply to thread

Message: <blockquote data-quote="Silver95bird" data-source="post: 1428139" data-attributes="member: 21743"><p>The first thing I'd want is a dial indicator with a loooong arm that could reach the follower as installed. I know it's better to measure the adjuster and valve directly, but logistically this is what we have to work with. It'll at least give us ball park numbers. I'm also thinking the whole NPI pi differences in the adjuster, valve height and pressure will give two separate sets of readings. If the head is on a bench, at least the valve could be measured directly. But it's tough to keep a cam at a setting mid lift that way. Installed may be much easier to work with.</p></blockquote><p></p>