Reply to thread

Message: <blockquote data-quote="CobraRGuy" data-source="post: 1582456" data-attributes="member: 24211">Hi all,I have a leak in my P/S pressure line and have decided to re-plumb it from the pump to the rack with braided SS hose and AN fittings.At the pump end, I found a Russell Performance fitting <a href="https://www.cjponyparts.com/russell-power-steering-adapter-fitting-6-an-male-to-5-8-inch-18-o-ring-seal-clear-anodized/p/648030/" target="_blank">648030</a> on cjponyparts that appears to be correct. This has 5/8"-18 threads and an o-ring around the extended tip. Are these 5/8"-18 threads correct? The rack fittings seem easier to find.I wanted to run this by y'all before I order it. Here's what it looks like:[ATTACH=full]47869[/ATTACH]Thanks, CobraRGuyP.S. I went from $4.79/gallon in CA to $2.31/gallon in TX. Yes that's right... less than half the cost. Also, my registration went from $379 to $70.</blockquote>