Reply to thread

Message: <blockquote data-quote="BruhBrahBrad" data-source="post: 1015770" data-attributes="member: 10790">To keep it short and simple, I want to budget build a motor that will be able to make and handle 500-600 hp...heres a basic run down of what I was thinking...teksid blockcobra crankforged rods and pistonsnpi heads home porteda set of blower camspi intake (already have)and a supercharger...now my question is, what are a good set of rods and pistons to handle my goals, and not break the bank, and whats a good set of blower cams that have good performance qualities, but also have a intimidating lumpy sound, I know I know its not about the sound, but I like the lumpy cam sound.. was looking at mhs stage 2 npi blower cams, and hp 292's...should i replace the valve springs?ALSO I dont want to just slap these parts in and reuse all the old bearings and stuff, what should I replace all the old stuff with? thanks for the help..im not as good with 4.6's as 5.0s but I like that the blocks are much stronger and mpg is better, so im trying to work with the modular motor.</blockquote>