Reply to thread

Message: <blockquote data-quote="ScottyDsntKnow" data-source="post: 1387590" data-attributes="member: 10454">So enough ppl called me an idiot for me to listen.  Picked up a pair of 99/01 C heads, valve covers, cop covers and 4V cops for $100 locally.  They need a deep cleaning and probably going to get them decked (or ghetto DIY deck them myself) but can't argue with the price.  I needed the valve covers and COP covers anyway and they came with cams too.  <a href="http://s46.photobucket.com/user/ScottyD035ntKnow/media/Mobile%20Uploads/20160506_134712_zpsdjacqumi.jpg.html" target="_blank"><img src="http://i46.photobucket.com/albums/f128/ScottyD035ntKnow/Mobile%20Uploads/20160506_134712_zpsdjacqumi.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /></a>I have a line on a real clean Mach intake manifold to go with.  And the 96-98 Cobra cams I have 2 sets of now.  So low end is taken care of hopefully. Also found this motor locally with a rod knock (crank survived) for $350 so once I sell that intake and Teksid and other misc parts that will be a free forged crank.  <a href="http://s46.photobucket.com/user/ScottyD035ntKnow/media/Mobile%20Uploads/20160503_155419_zpscirrbmda.jpg.html" target="_blank"><img src="http://i46.photobucket.com/albums/f128/ScottyD035ntKnow/Mobile%20Uploads/20160503_155419_zpscirrbmda.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /></a>And I also found the original owner of that WAP block and confirmed the work done and got receipts and everything from him.  Got it for $300.  .020 over, torque plate bored, line honed and ready to go.  <a href="http://s46.photobucket.com/user/ScottyD035ntKnow/media/Mobile%20Uploads/20160424_142706_zps3bxj8gl8.jpg.html" target="_blank"><img src="http://i46.photobucket.com/albums/f128/ScottyD035ntKnow/Mobile%20Uploads/20160424_142706_zps3bxj8gl8.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /></a>Its the one on the left obviously.  I am selling that Teksid and a complete Mark VIII motor I got for free tomorrow for $700 and that will make me cost neutral before even parting out that clean Cobra motor on the pallet.  I may have found a side hobby flipping modular parts... they are abundant around here.</blockquote>