Reply to thread

Message: <blockquote data-quote="ryclef331" data-source="post: 450264" data-attributes="member: 8067"><p>Small punch and the pin comes out no problem. Take the dizzy and put it upside down in a vice but only close the jaws enough so they they don't squeeze the dizzy but will catch the gear. A few good yanks down (kinda like a slap or slide hammer) and it pops off. I know NOT EVERYONE has a vice or a punch set but I'm sure I can do the same with a pair of vice grips, a hammer, and a small screwdriver. If you need a press, you got bigger issues. Send the dizzy to me if you can't get the gear off. I got a pip in the garage. I'll rebuild it and have a spare...</p></blockquote><p></p>