Reply to thread

Message: <blockquote data-quote="Thomas_W" data-source="post: 1442167" data-attributes="member: 9106">It is a cncrouter.  Its a small chinese 3040z, but i’ll probly be upgrading to a 24”x55” version early next year.  The composite “rack” really helps keep things organized.  With over 30 different fabrics, weaves and random other stuff (many of which arent on the wall) keeping it organized is a chore. The brembo’s do fit a 17” wheel with some slight mods to the calipers and with custom brackets (I designed and then 3D printed my own brackets in Solidworks.  I am waiting in my machinist to cut the brackets and then they go to the anodizer)The rear coating is from Master Series, they have an aluminumized primer that supposedly is 100% water and moisture proof to stop/prevent rust, then a “chassis black” that goes over it as a UV protectant.    It had the best reviews for rust prevention/proofer and it wasnt cheap (it was the most expensive) and the website had some pretty good claims, so i bought a quart kit, which did the entire underside with some of both left over.  Yup, stock steering rack.  A previous owner had an affinity for rattle canning random shit for some reason.... the tailshaft housing of the trans is rattle can black to.  Sent from my iPhone using Tapatalk</blockquote>