Reply to thread

Message: <blockquote data-quote="9838stang" data-source="post: 1130229" data-attributes="member: 13575"><p>The way to do it is, you need either a wide flat head screwdriver or a paper clip, you need to peel aside the interior panel of the trunk on the driver side. there behind the panel, there will be a black box. that black box you should see an "opening" where there are 2 metal prongs. touch those two prongs together with the screwdriver or paper clip. u will hear the locks cycle. when this happens push a button on the remote most likely the lock button. u will hear the locks cycle again. once that happens take you tool off the metal prongs, and u will hear the locks cycle again. once that happens you remote is sync'd and you are all done</p></blockquote><p></p>