Reply to thread

Message: <blockquote data-quote="krtw" data-source="post: 121514" data-attributes="member: 9312">The springs are not stock they are Ford racing B springs, I had this info in my signature so I did not retype it. No, there is no drag racing launch setup back there. I had these springs installed ~two years ago, they were new at that time. I removed the springs, they appear fine. They are the same height. The sway bar is fine too. I was looking at the mounting locations and I don't see any differences. The only thing I have noticed is the upper controll arms are making contact with my exhaust tubing, I suppose that could be it. Either way I need to correct that.The work continues.......Another day. I love having a garage and another car to drive.QUESTION: My chiltons manual says to discard the lower arm axis pivot bolt and nut that was removed and replace with a new, is this BS or what? I have never replaced a bolt and nut just because they were removed.</blockquote>