Rear tyre size recommendations

[Bitza]

So as the title says I'm after rear tyre size recommendations. I would like to go as wide as possible on the rear rims/wheels.

What I have,

1. 1995 Mustang GT, export version.

2. Eibach sportline springs and shocks to be fitted, so will be 2 inches lower at the front, but importantly 1.8 inches lower at the rear.

3. I have fitted a set of DTM Atom all around, 18x10 rear wheels, with 20 offset.

Presently I have 265/30r18 on them. Lots of other things done to her, 3.55 and rebuilt diff, energy suspension bushes all round.

So I would love to fit 295 up to 315's and still keep the same rolling diameter or slightly larger.

So, what have you guys fitted with a similar setup?????

Cheers

Chris.

 

[ttocs]

from my personal experience 315s fit no problem with the right wheels

 

[Bitza]

from my personal experience 315s fit no problem with the right wheels

TTOCS, cheers for the reply. I'm down in New Zealand, so I have to get this right first time, I will need to get the tyres in from the USA probably, as the sizes I'm looking for just dont get stocked here.

 

[evilcw311]

I fit 295’s with no issue. With as low as you’re going with a 315 the worst you’d have to do is roll the fender lip.


Sent from my iPhone using Tapatalk

 

[Bitza]

I fit 295’s with no issue. With as low as you’re going with a 315 the worst you’d have to do is roll the fender lip.


Sent from my iPhone using Tapatalk

Cheers, since I have got the flares on my car I shall keep that in mind.

 

[96blak54]

There will be modifications to the inner fender lips and trunk side walls to fit 345 wide tires

 

[Bitza]

There will be modifications to the inner fender lips and trunk side walls to fit 345 wide tires

Cheers for the reply, but only looking at 305 or 315.