Reply to thread

Message: <blockquote data-quote="ttocs" data-source="post: 1551354" data-attributes="member: 11896"><p>judging by the 2 leds you might have more than one.  Follow the wires from the leds to the main module and then you will probably find a mess of wires.  Follow each one and disconnect and then make sure that there is no bare copper showing.  If by chance they hooked up the starter kill and it is just the usual relay/normally closed starter kill you can just leave it alone.  If it is a normally open starter kill disconnecting the alarm will mean that the car will not be able to start until we reconnect the starter wires.</p></blockquote><p></p>