Reply to thread

Message: <blockquote data-quote="9550" data-source="post: 1055054" data-attributes="member: 16884">ok, so trying to take off the passenger side cylinder head.a lot of the header bolts are stripped, so i planned to do what i did when i took the drivers side cylnder head off; i disconnected the header from the exhaust pipe and took the head and header off as one piece.so, i think this should be easy enough. i go under andthen i see i cant get to the nut at the exhaust pipe flange because the oxygen sensor (i believe its the oxygen sensor) is right in the way. i assume theres no other way for me to get the exhaust pipe off than to take out the sensor.so, anything special i need to do or just stick a wrench on it an turn? looks pretty cramped there. i would have tried it already but i dont have the right size wrench for the sensor nut.anybody know what size it is?is there a way to get the exhaust pipe off without removing the sensor? (i dont believe so)thanks in advance for any help</blockquote>