RTV?

[97stanger]

Well i had pretty bad pittage, if thats even a word haha, on my old headlights so before i put my new ones on i wanted to put some RTV on the back to make sure condensation doesnt get in. I went to pep boys and they sold this stuff called "Blue RTV" which was a glue...i expected RTV to be a spray but i just wanted to see if this is the stuff i should get for the back of my headlights...thanks again guys

 

[Goldmember]

Look for clear silicone- that's your best bet.

 

[97stanger]

now will this be a spray or a gel/glue?

 

[Goldmember]

Comes in a tube like RTV silicone would and is about the same consistency as RTV.

 

[97stanger]

okay thanks for the help goldmember :thumb:

 

[vermilion]

mask off the area and leave enough for the seam to be rtv'd and go around the housing. then let it get tacky and not dry and peel off masking tape. then let it dry fully. usually 8-24 hour drying time. i used mil spec rtv and thats the required time. after a month or so use plastic polish some.

 

[Trickflow.GT]

I got sealant sillcone for glass and plastic...worked like a charm!! :thumb: