Reply to thread

Message: <blockquote data-quote="clobato" data-source="post: 210263" data-attributes="member: 9897">Thanks for the comments guys. The Mach is Torch Red. It's my weekend toy and the Cobra is my daily driver. I drove the Mach and dad got "stuck" with the Cobra.Here are the suspension setups for the cars:Mach:Front:Intrax Springs (cut 1/2 coil)MM Caster Camber PlatesMM Upper and Lower Urethane IsolatorsMM Aluminum Rack BushingsSteeda Bumpsteer KitSteeda X2 Ball JointsTokico D-Spec StrutsRear:Intrax SpringsMM Adjustable Lower Control Arms, Adjusted to lowest settingMM Upper and Lower Urethane IsolatorsTokico D-Spec ShocksAZA Z1 wheels, 18"x8.5" with 245/40/18 in the front and 18"x9.5" with 295/35/18 in the rear. Cobra:Front:Eibach Prokit Springs MM Caster Camber PlatesMM Aluminum Rack BushingsSteeda Bumpsteer KitSteeda X2 Ball JointsRear:Eibach Prokit SpringsMM Standard Lower Control ArmsFRPP Upper Control ArmsStock 17"x8" Mach 1 wheels with 245/45/17 all the way around.I swapped out the springs, struts and shocks on the Cobra about an hour after the pics were taken. It now has Eibach Sportline springs and Tokico HP struts and shocks.</blockquote>