Teal_Beast
New Member
- Joined
- Feb 23, 2007
- Messages
- 40
- Reaction score
- 0
Hey fellas i've got a '94 v6 O0 with a few mods I did an intro in the intro forum but i figure'd id introduce myself here because well . . . im a v6 guy.
My mustang is my only car and its been that way for almost three years now, i got it in june of 2004 and it was stock with 70k miles on it. I've been through a motor, two superchargers, 2 trannies, and 2 rearends, and a lot of blood since then. Its rough modding my car because its my daily driver but i cant help it anyhow, It is just a testiment to these cars that i can boost 15psi through a turbo on a stock motor and still drive 40 miles round trip to work and back each day. O0
Anyhoo here is a mod list of mine that i have previously compiled.
Enjoy and thanks.
ENGINE
2000 3.8l v6 mustang Motor swap
Twin ported 16g's at 15psi
Stock Longblock down to the TB
FUEL
Walbro 255lph Fuel pump
42# Injectors
Custom Fuel Rail
DRIVETRAIN
G-Force spec T5 Tranny
Steeda Tri-Ax Shifter
Mcloud Clutch+PP
Alluminum D/S
8.8" rearend 31 spline axles, posi, 3.73 gears
Steeda Double Hook Quadrant
Steeda Firewall CAble Adjuster
Driveshaft Loop
SUSPENSION
MAC Subframe connecters
Lakewood Lower Control Arms
No front swaybar
VISUAL
20% window tint
99-04 GT wheels
MISC
A/C Delete
160* Thermo
Aftermarket Alluminum Radiator
Battery Relocation
28x8x15 Mickey Thompson ET DRAG SLICKS
LC-1 Wideband 02 Sensor
SCT X-Cal 2
INTERIOR
2 pod a-pillar pod
2 pod's on the consol
Boost gauge
oil pressure
Exhaust Temp Gauge
Wideband A:F ratio gauge
Billet Pedal covers
Steeda Shifter Bezel
Steeda Billet headlight knob
Steeda Billet Turn Signal
Steeda Billet Hollow Point Door Lock Pins
Hurst Billet Pistol Grip Shifter
AUDIO
4 5x7 Alpine door speakers
4 Alpine Tweeders
Kenwood Deck
EXTERIOR
Window tint
GT take off wheels
WAITING TO BE INSTALLED
1.8 adjustable roller rockers
Upper Control arms
MSD box
Under Drive Pulleys
Front slotted roaters
front + rear GT calipers
FUTURE MODS
Tubular k member + a arms
built stroked shortblock (4.3l)
Ported BV heads Ported intake
Cam
My mustang is my only car and its been that way for almost three years now, i got it in june of 2004 and it was stock with 70k miles on it. I've been through a motor, two superchargers, 2 trannies, and 2 rearends, and a lot of blood since then. Its rough modding my car because its my daily driver but i cant help it anyhow, It is just a testiment to these cars that i can boost 15psi through a turbo on a stock motor and still drive 40 miles round trip to work and back each day. O0
Anyhoo here is a mod list of mine that i have previously compiled.
Enjoy and thanks.
ENGINE
2000 3.8l v6 mustang Motor swap
Twin ported 16g's at 15psi
Stock Longblock down to the TB
FUEL
Walbro 255lph Fuel pump
42# Injectors
Custom Fuel Rail
DRIVETRAIN
G-Force spec T5 Tranny
Steeda Tri-Ax Shifter
Mcloud Clutch+PP
Alluminum D/S
8.8" rearend 31 spline axles, posi, 3.73 gears
Steeda Double Hook Quadrant
Steeda Firewall CAble Adjuster
Driveshaft Loop
SUSPENSION
MAC Subframe connecters
Lakewood Lower Control Arms
No front swaybar
VISUAL
20% window tint
99-04 GT wheels
MISC
A/C Delete
160* Thermo
Aftermarket Alluminum Radiator
Battery Relocation
28x8x15 Mickey Thompson ET DRAG SLICKS
LC-1 Wideband 02 Sensor
SCT X-Cal 2
INTERIOR
2 pod a-pillar pod
2 pod's on the consol
Boost gauge
oil pressure
Exhaust Temp Gauge
Wideband A:F ratio gauge
Billet Pedal covers
Steeda Shifter Bezel
Steeda Billet headlight knob
Steeda Billet Turn Signal
Steeda Billet Hollow Point Door Lock Pins
Hurst Billet Pistol Grip Shifter
AUDIO
4 5x7 Alpine door speakers
4 Alpine Tweeders
Kenwood Deck
EXTERIOR
Window tint
GT take off wheels
WAITING TO BE INSTALLED
1.8 adjustable roller rockers
Upper Control arms
MSD box
Under Drive Pulleys
Front slotted roaters
front + rear GT calipers
FUTURE MODS
Tubular k member + a arms
built stroked shortblock (4.3l)
Ported BV heads Ported intake
Cam