Reply to thread

Message: <blockquote data-quote="JDwhite98gt" data-source="post: 854116" data-attributes="member: 10517"><p>I would search for a diagram showing how all thos parts go/fit together or get a haynes manual, then I would loosen the joint from behind the steering wheel and then from the rack and then pull out the steering shaft. Be careful when u unbolt it from the back of the steering wheel becasue there is a spring there. Check all the parts for wear and replace as necessary. I have a 98 and there isnt torx bolts holding any of the parts together I think its a 10 millimeter bolt on both connections behind the steering wheel and at the steering rack. You might also have to replace that plate that attaches to the firewall, I believe the boot is supposed to be attached to that.</p></blockquote><p></p>