Reply to thread

Message: <blockquote data-quote="Twista" data-source="post: 1307616" data-attributes="member: 8202">OPERATIONS DO THE SH!T RIGHT THE FIRST TIME, DAYDecided to get under the car today and found i could access the starter wires through a hole in the metal of the body. fFirst i was going to take the starter off. Never knew i could reach the wires that way which is why it took so long the first time i installed the damn starter.Turned out the big power wire was loose and the trigger wire was breaking off with only 2 strands left to the starter. Turned out i stripped the big power wire solenoid bolt when i first installed the starter months ago. So that sucks but i was able to get it to tighten down by removing a extra washer. Corrected both by soldering a new connection on the trigger wire and then heat strinking the new trigger wire then wrapping it with electric tape to make a barrier so it doesnt get chaffed much on the metal if it touches.1<img src="http://i60.tinypic.com/11vk3sw.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />2- Making a new Trigger Wire- <img src="http://i62.tinypic.com/2ppni3r.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />3- New Trigger Wire-  <img src="http://i62.tinypic.com/2iu48ds.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />4- Trigger <img src="http://i61.tinypic.com/2112vwo.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />All done but pissed the solenoid post is stripped but it still had 4 treads left i could salvage - <img src="http://i62.tinypic.com/vdprvq.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /><img src="http://i57.tinypic.com/2eeezcm.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />.</blockquote>