JDwhite98gt
Well-Known Member
- Joined
- Apr 6, 2008
- Messages
- 1,285
- Reaction score
- 0
So my driver's seat is really worn down and there is a hole in the left bolster (next to my left thigh), a lot of the stuffing has fallen out and I can feel the skeletal structure of the seat. I unbolted my seats the other day and tried to figure a way to switch the passenger seat for the drivers. What I was able to do was simply unbolt the backs of the seats, unclip the fabric and simply lift the bottom skeleton and seat track as one piece right out of the foam, so really I just swapped the passenger side seat foam over to the driver's side seat and vice versa. Now I know my original drivers side seat foam was really worn but for some reason I'm sittinga helluva a lot higher now. I'm 5' 11" and I'm real picky about good driver seating position, and I was able to sit pretty close to the steering wheel, lean the seat back and drive with the steering wheel on its lowest position, now I can barely drive like that, my knees hit the steering wheel in the middle position and I almost have to drive with my hands stretched all the way out. Do the seat cushions have a different design from side to side?