Reply to thread

Message: <blockquote data-quote="in2infinity" data-source="post: 1527141" data-attributes="member: 30581"><p>Thanks for the link to the tutorial .. looks like there's some good info in there.  I'm doing the Kee AutoTops one peice with the plastic window.  Almost all done with the exception of these tack strips.  Everyone seemes to sell the 3/16" stuff, but the material on the car is 1/8" thick.  I'm not sure if the extra 1/16" thickness would be an issue, probably not on the front lip but the two section on the top corners above the latches are in a recessed area.  That recess seems borderline too shallow for 3/16" material.  Fortunately, I did find a couple sources for 1/8" which is on the way.  Overall, not a difficult process to replace the top so far.  Looking forward to getting it finished.</p></blockquote><p></p>